HuskyGuard® Above-Drain Stormwater Filter: SPL098
$175.00 – $246.00
Custom-sized storm drain filter for low traffic areas.
The HuskyGuard® Above-Drain Stormwater Filter is your go-to solution for preventing oil and sediment from entering storm drains. UV-resistant and built to handle high flow rates, this easy-to-install solution keeps you compliant with stormwater regulations while protecting our environment.
Recycled
UV-Resistant
Made in the USA
Filters Oil from Water
Order Standard or Custom Sizes: Choose a standard size from the dropdown menu, or click below to calculate pricing for custom sizes. For assistance, call us at 814-822-2004.
Description
Description
Introducing the HuskyGuard® Stormwater Filter for Easy Maintenance in Low Traffic Areas
What if you could stop lifting heavy storm grates to conduct routine storm drain maintenance and have the job done in less than 5 minutes? Now you can do both!
Maintaining storm drains and preventing oil sheens and Total Suspended Solids (TSS) from leaving the facility shouldn’t be frustrating, time-consuming or messy. For storm drains near the edges of paved areas that don’t see much traffic, HuskyGuard® Above-Drain Stormwater Filters capture oil sheens; trap dirt, sand and silt; and prevent trash and debris from entering storm grates.
Maximize Stormwater Protection and Control Pollution
As a customer-focused company, HalenHardy® is committed to providing quality solutions. We are proud to introduce our patented HuskyGuard® Above-Drain Stormwater Filter, designed with valuable customer feedback and tailored to maximize stormwater protection and pollutant control. This revolutionary product offers the following features:
- Heavy-duty polyethylene mesh top for drive-over durability
- Spilltration® Husky filtration layer for removing oils, fuels, sheens and sediments
- Raised center captures debris during higher-flow situations
- Overflow port prevents water from backing up in heavy rain events
- Extra-strength magnets for easy installation and removal
No Special Tools Required: HuskyGuard® Stormwater Filter Maintenance
After a storm event or during regularly scheduled housekeeping, just sweep up any accumulated dirt, debris or trash around the drain. Because the storm grate remains in place and oil and debris are prevented from entering, cleaning up the area around the drain can be completed in less than five minutes without the need to remove the grate. When the HuskyGuard® Above-Drain Filter has reached its oil absorption capacity, you can replace it with a fresh one in less than five minutes with no special tools.
Learn More:
In the Field: Innovative Storm Drain Best Management Practice
Blog: Top 5 Industrial Stormwater Pollutants
Case Study: HalenHardy® Customer Reduces TSS by 94% and FOG to Undetectable Levels
On-Demand Webinar: Stormwater Pollution Control
Industry Spotlight: Storm Drain Solutions for Marine Terminals
Downloads: Cost Comparison Worksheet, Product Spec Sheet
Regulations: Stormwater Pollution Prevention Plans (SWPPP)
Videos
Videos
New! An innovative solution for filtering oil, sheens, silt, and sediment from stormwater
Now it's easier than ever to install and maintain your storm drain protection
Keep silt, sediment, trash, oil, and fuel sheens out of your storm drains
See the HuskyGuard® Above-Drain Stormwater Filter in action
Product Specifications
Product Specifications
- Substances Filtered: Oil, Sediment, Trash & Debris
- Overflow Hole Size: 6″ x 6″
- Sold As: Each
- Recycled Content: Yes
- UV Resistant: Yes
| SKU | Dimensions | For Drain Sizes | Absorbency | Max Flow Rate | Weight |
|---|---|---|---|---|---|
| SPL098-3030-M | 30″ x 30″ x 1″ | 24″ x 24″ | Up to 1.875 gal | 500 gal/min | 1.6 lbs |
| SPL098-3333-M | 33″ x 33″ x 1″ | 27″ x 27″ | Up to 1.26 gal | 695 gal/min | 1.9 lbs |
| SPL098-3042-M | 30″ x 42″ x 1″ | 24″ x 36″ | Up to 1.625 gal | 824 gal/min | 3.1 lbs |
| SPL098-3054-M | 30″ x 54″ x 1″ | 24″ x 48″ | Up to 3.375 gal | 1099 gal/min | 4 lbs |
| SPL098-3354-M | 33″ x 54″ x 1″ | 27″ x 48″ | Up to 3.71 gal | 1236 gal/min | 4.4 lbs |
| SPL098-30-M | 30″ x 30″ x 1″ | 24″ Diameter Round | Up to 1.875 gal | 500 gal/min | 1.6 lbs |
| SPL098-36-M | 36″ x 36″ x 1″ | 30″ Diameter Round | Up to 2.7 gal | 858 gal/min | 2.3 lbs |
Compliance and Restrictions
Compliance and Restrictions
- Husky products do NOT float. NOT for use on water.
- DO NOT use with acids, bases or oxidizers.
- Dispose of used product in compliance with local, state & federal regulations
